TC Electronic Hall of Fame 2 Reverb Pedal

32204

Translation missing: en.products.item.price.price_per_unit_html

Notify me when this product is available:

The new Hall Of Fame 2 Reverb covers everything the original did and packs 3 new powerful features.

The revolutionary MASH technology adds the rich and fluid articulation of an expression pedal to your reverb effects in the same compact stompbox that you know.

On top of that, we carefully designed a crystalline Shimmer reverb that you can control with MASH for spine-tingling performance in real-time.

In fact, you can control pretty much any parameter conceivable with MASH.
With the TonePrint Editor you can unleash the
expressive potential in MASH any way you like.
Of course, you can still get all the iconic reverbs
and TonePrints that you know from the original. 

  • Expressive MASH technology
  • 8 reverb types including Shimmer
  • 3 TonePrint slots 

True to Tone

You love tone, so do we, and our design philosophy testifies to that. So whatever route you wanna go, we got your back. With optimized headroom, True Bypass or Buffered Bypass switch and Kill-Dry on/off, this pedal guarantees optimal tonal integrity and zero loss of tone. And, no matter if the pedal is on or off your precious dry sound is always passed through the pedal unharmed in all it's pure analog glory due to an Analog-Dry-Through.

Room

In the Room setting, MASH controls the level of the reverb effect. If you turn the level knob all the way down, you can use the MASH switch as a volume pedal for the reverb signal. This means that if you don’t MASH the switch the reverb is inaudible.

Hall

In the Hall setting, MASH controls the level of the reverb effect. If you turn the level knob all the way down, you can use the MASH switch as a volume pedal for the reverb signal. This means that if you don’t MASH the switch the reverb is inaudible.

Spring

Set on Spring reverb, MASH controls the level of the reverb effect. If you turn the level knob all the way down, you can use the MASH switch as a volume pedal for the reverb signal. This means that if you don’t MASH the switch the reverb is inaudible.

Plate

Using the Plate setting, MASH controls the level of the reverb effect. If you turn the level knob all the way down, you can use the MASH switch as a volume pedal for the reverb signal. This means that if you don’t MASH the switch the reverb is inaudible.

Church

When you go to Church, MASH controls the reverb decay for a maximum of 20 seconds. Once you lift your foot of the switch, the decay parameter will return to the position of the decay knob. Pro tip: Set the decay knob to minimum for a dramatic effect!

Shimmer

In Shimmer mode, MASH raises the volume of the Shimmer effect, which essentially is sending the Church algorithm through a Sub ‘N’ Up Octaver in a feedback loop. At the same time, MASH controls the reverb decay to a maximum of 13,9 seconds. Finally, it also changes the tone of the Shimmer sound.

Mod

Using the Mod setting, MASH affects the speed and depth of the modulation tail from our sweet sounding TriChorus algorithm known from the Corona Chorus.

LoFi

In the LoFi mode, MASH controls reverb decay up to a maximum of 20 seconds. It also manipulates the tone of the reverb.

TonePrint 1

The first TonePrint preset is a Shimmer reverb based on the TC Ambient algorithm with an added vibrato effect. MASH controls the modulation depth and the feedback of the Vibrato.

TonePrint 2

The second TonePrint takes a Shimmer reverb based on the TC Cathedral algorithm and combines it with a flanger. MASH raises the volume of the Shimmer and the delay of the Flanger.

TonePrint 3

The third TonePrint is a Church reverb with added Shimmer and luscious TriChorus. MASH controls the input level of your instrument, acting just like a volume pedal. This means that the signal is only audible when you MASH the switch!


Type: Effects