Disaster Area Designs MJ-5P MultiJack to 5-pin MIDI cable

Description

Custom-made 3ft. 1/4″ right angle TRS to 5-pin DIN MIDI cable. Use this to get an extra 5-pin MIDI port from your Gen3 or newer controller.  Resulting 5-pin output port is compatible with all standard MIDI devices and conforms to the MIDI.org specifications in full.

Compatibility:

Works with all Disaster Area Gen3 MIDI controller MultiJacks.  Not compatible with Gen2 or older units.

Directions for use:

Set the DIP switches for your controller’s MultiJack to ON-ON-ON (most controllers) or ON-ON-ON-OFF (SMARTClock Gen3, DMC-6/8 Gen3.)

Enter the controller setup menu and configure the MultiJack for MIDI output.
DMC-3XL / 4, DPC-5, DMC.micro, JACK = MIDI
SMARTClock Gen3, MJ C or MJ D = MIDI
micro.clock, J C = MIDI

Save and exit.